电力线MAC/PHY集成收发器INT51X1及其应用

介绍了美国Intellon公司的电力线MAC/PHY集成收发器INT51X1的功能结构和主要特点 ,介绍了它的引脚功能 ,同时以中压配电网OFDM通信系统的研究开发为例 ,给出了INT51XI的应用实例。     

关于混凝土四面体截流材料的探讨

通过对比混凝土四面体与特大块石这两种截流材料的抗冲稳定性和施工的方便性,分析了混凝土四面体截流材料在工程应用中存在的问题。指出:①混凝土四面体密度、综合稳定系数、化引球形粒径都偏小,在龙口的抗冲稳定性不如特大块石;②混凝土四面体制作麻烦,成本高,占地面积大,装运困难,抛投强度低,施工不如特大块石方便;③在截流施工中宜优先使用特大块石,慎用混凝土四面体。     

工程施工阶段监理的投资控制

建设工程施工阶段是工程投资发生的主要阶段,监理工程师在该阶段应重点把好工程计量关、支付签证关及变更索赔关,从而实现对施工阶段投资的有效控制。     

利用铝（100）面隧道孔制备纳米模板及有序阵列材料

高纯铝箔通常通过电化学扩面后用作铝电解电容器的阳极材料。利用铝箔（100）面隧道孔制备纳米模板。这种纳米模板的特点是制作简单、模板面积大，纳米阵列材料形状可控性强。还利用两步电化学侵蚀铝箔的特殊工艺，研制出纵横交错的TiO2纳米有序阵列材料。     

比较法在房地产开发中的应用

对"比较法"原理和应用情况进行了分析,说明其在房地产开发中能够科学地预测房地产的价格和收益,从而提高财务分析的科学性和权威性,为项目决策提供科学依据,以促进"比较法"在房地产开发中的应用。     

煤矿破碎机人员安全探测系统的研制

文中给出了煤矿人员安全探测系统设计的性能要求，详细介绍系统的硬件设计和软件设计。对利用热释电传感器实现人员定位与移动相对位置匹配算法设计进行深入细致的讨论．从防止漏报警、提高系统可靠性和降低系统功耗三个方面探讨了设计中涉及到的关键技术及其具体解决方法、与其他报警和定位系统相比，系统具有结构简单、成本低、功耗小、定位准确的特点。     

异喹啉的脉冲辐解和激光光解研究

用脉冲辐解和激光光解相结合,研究了异喹啉这种难降解杂环化合物在紫外光作用下的变化和与HO·的反应.结果表明,在波长为266nm的激光作用下,异喹啉不仅发生光激发,而且发生单光子电离,其量子产额为1.58×10-4.异喹啉光电离产生的阳离子自由基可以脱去质子,其pKa为5.50.异喹啉可以与HO·发生反应,其反应速率常数为3.4×109 mol-1·dm3·s-1.本工作的研究将为photo-Fenton法降解异喹啉提供理论上的依据.     

Research on charge ordering and magnetic properties in La0.3Ca0.7Mn1-xWxO3 system

The perovskite manganite sample La0.3Ca0.7Mn1-xWxO3 （x = 0.08, 0.12） was prepared by the solid-state reaction method. The effect of W doping on the Mn site to La0.3Ca0.7MnO3 charge ordering phase and the changing process of magnetic properties were studied through the measurement of the M-T curve, M-H curves, and ESR curves of the sample. The results showed that when x = 0.08, the charge ordering （CO） phase exists in the system, the transition temperature Tco= 275 K, and the system exhibits PM when T 〉 275 K. The system transforms from spin-disordering paramagnetism to spin-ordering antiferromagnetism in the charge ordering state with the temperature decreasing from 275 K to 230 K. The long-range antiferromagnetism forms and AFM/CO states coexist between 230 K and 5 K. There is a little ferromagnetic component in the AFM/CO background in a low temperature range. When x = 0.12, the CO phase in the system has almost melted completely. There is a little remnant of the CO phase below 150 K. The system exhibits paramagnetism when T 〉 150 K and transforms from paramagnetism to ferromagnetism when T〈 150 K.     

Time Characterization of High Density Gas Jet from a Pulsed Supersonic Nozzle via Laser Produced Plasma

A high-density gas jet supersonic nozzle is reported in this paper. The jitter and actuation time of the nozzle is determined by the pin discharge and laser spark radiation respectively. The jitter time of the nozzle is within 10μs with the backing pressure as high as 25 bar. With a nanosecond laser pulse focused on the gas jet about 1 mm below the nozzle, the actuation time is calculated to be about 15 ms by detecting the laser produced spark radiation, which reveals the existence of the gas jet and the relative gas density evolving with time. Consequently the gas density is estimated to be well above 10^19 cm^-3, compared with theoretical simulations from the nozzle parameters.